It is a single-component ink and can be used as two-component ink.
It has bright satin appearance and excellent covering properties.
Non-toxic pad printing colors (AT) complies with the European Directive of EN 71.3 and 2002/95 / EC. (RoHS).
COMEC Renk skalas─▒nda ├Ârt├╝c├╝ tonlarda 22 standart renk ve CMYK renkleri bulunmaktad─▒r.
T├╝m renkler birbirleriyle kar─▒┼čt─▒r─▒labilir.
─░stenirse; ├ľzel numune renkler ve metalik / g├╝m├╝┼č tonlar─▒nda renkler haz─▒rlanabilir.
Excellent adherence on the materials given above.
If used as a two-component ink, it improves mechanical-chemical resistance and adherence to the printed surface.
It should not be used on products exposed to ultraviolet light for long time.
DRYING and HARDENING:
The drying time lasts between 1 and 2 minutes at an ambient temperature of about 20┬░C.
If you would like it to dry in only a few seconds, you can use hot air circulation ovens (60-80 b ┬░C) or high temperature spot devices (air or infrared rays) that can be installed on the piece feeding systems (e.g. rotary tables, conveyors, etc.).
The ink is completely hardened in 24 hours
Mix 10-20% PLA thinner with ink and stir the mixture thoroughly.
In hot environments, we recommend using a small amount of PLD retarder when printing fine details or screened images (e.g. 80-120 lines per cm).
To increase the mechanical and chemical resistance or adherence to the support, the ink can be used as a two-component ink by adding the special PLH catalyst in a 10:1 ratio (10 parts ink and 1 part catalyst).
PPLD retardant paste
PLT6/70 transparent base
Fluorescent and Metallic Colors
|Colors on the color scale are representative. Request a sample for true color.|