It is a single-component ink and can be used as two-component ink.
Quick drying, with a glossy appearance and excellent opacity.
Non-toxic pad printing inks (AT) complies with the European Directive of EN 71.3 and 2002/95 / EC. (RoHS).
Duroplast (technically pretreated)
Excellent adherence on the materials given above.
As a two-component ink, it improves mechanical-chemical resistance and adherence to the printed surface.
It has excellent resistance to fading due to light effect with DIN 6-8 fade resistance level.
Mix 10-20% PLA thinner with ink and stir thoroughly.
In hot environments, we recommend using a small amount of PLD retarder when printing fine details or screened images (e.g. 80-120 lines per cm).
To increase the mechanical and chemical resistance or adherence to the support, the ink can be used as a two-component ink by adding the special PLH catalyst in a 10:1 ratio (10 parts ink and 1 part catalyst).
Drying and Hardening:
The drying time lasts between 1 and 2 minutes at an ambient temperature of about 20°C.
If you would like it to dry in only a few seconds, you can use hot air circulation ovens (60-80 b °C) or high temperature spot devices (air or infrared rays) that can be installed on the piece feeding systems (e.g. rotary tables, conveyors, etc.).
The ink is completely hardened after 24/48 hours.
Fluorescent and Metallic Colors
|Colors on the color scale are representative. Request a sample for true color.|
COMEC color scale has 24 standard colors in bright tones and CMYK colors.
All colors can be mixed with each other.
On request; Special sample colors and colors in metallic/silver tones can be prepared.
PLB fast thinner
PPLD retarder paste
PLT 9/70 transparent base