Comec PLT6

It is a single-component ink and can be used as two-component ink.
Brilliant satin finish and covers well.
Non-toxic ink (AT) complies with the European Directive of EN 71.3 and 2002/95 / EC. (RoHS).


Flexible Substrates
Plastic materials


Excellent adherence on the materials given above.
As a two-component ink, it improves mechanical-chemical resistance and adherence to the printed surface.
It is not recommended for use on products which have prolonged exposure to UV rays.


Use %10-20 PLK thinner to thin the ink and stir the mixture.
In warm environments, we recommend using a small amount of PLD retarder when printing fine details or screened images (e.g. 80-120 lines per cm).
To increase the mechanical and chemical resistance or adherence to the support, the ink can be used as a two-component ink by adding the special PLH catalyst in a 10:1 ratio (10 parts ink and 1 part catalyst).

Drying and Hardenening:

The drying time takes 1-2 minutes at an ambient temperature of about 20°C.
If you would like it to dry in only a few seconds, you can use hot air circulation ovens (60-80°C) or high temperature spot devices (air or infrared rays) that can be installed on the piece feeding systems (e.g. rotary tables, conveyors, etc.).
The ink is completely hardened after 24 hours.

Color Range:

COMEC color chart of glossy hues that includes a selection of 22 standard colors plus 3 three-color shades.
All of the color shades can be mixed with each other.


PLK thinner
PLD retardant
PPLD retardant paste
PLH catalyst
PLT6/70 transparent base
OP opaficer

Colormatic Colors

Comec PLT Ana Renkler

Standard Colors

Comec PLT Karışım Renkler

CMYK Colors

Comev PLT Proses Renkler

Fluor and Metallic Colours

Comec PLT Floresan ve Metalik Renkler


Colors on the color scale are representative. Request a sample for true color.