It is a two-component pad printing ink that dries quickly with a glossy appearance and excellent opacity properties. Excellent resistance to mechanical and chemical effects after 7-8 hours of polymerization.
Non-toxic pad printing colors (AT) comply with the European Directive of EN 71.3 and 2002/95 / EC. (RoHS).
Materials such as polypropylene and polyethylene (pretreated)
Painted surfaces (epoxy and oven painted)
PLT4 has excellent resistance to many organic solvents, chemical substances and diluted acids.
Resistant to fading due to light effect with DIN 6-8 fade resistance level.
Mix the ink and PLH catalyst in 4:1 ratio (4 units of ink, 1 unit catalyst).
Ratio for transparent colours and transparent varnishes: 3 units of ink, 1 unit of catalyst.
The catalyzed ink should be consumed within 6-8 hours after it is prepared.
Use %10-20 PLA thinner to thin the ink and stir the mixture.
In hot environments, we recommend using a small amount of PLD retarder when printing fine details or screened images (e.g. 80-120 lines per cm). It is recommended that you use the catalyzed ink after 15-20 minutes.
Drying and Hardening:
Dries within 10-15 minutes at 20°C ambient temperature.
If you want to dry in a few seconds, you can use hot air circulating ovens (60-80 ° C) or high temperature spot heat sources (air or infrared) placed on a turntable or conveyor belt.
The ink is fully hardeed after 5-6 days.
COMEC Color Scale has 24 standard colors in bright tones and CMYK colors.
All colors can be mixed with each other.
On request; Special sample colors and colors in metallic/silver tones can be prepared.
Fluor and Metallic Colors
|Colors on the color scale are representative. Request a sample for true color.|
PLB Fast Thinner.
PPLD Retarder Paste
PLT4/70 Transparent Base