Comec PLT15

It is a single-component ink and can be used as two-component ink.

Quick drying, with a mat appearance and excellent covering properties. Non-toxic pad printing colors (AT) complies with the European Directive of EN 71.3 and 2002/95 / EC. (RoHS).

Application:

Polyethylene polypropylene (pretreated)
Polymethyl methacrylate
Soft and Rigid PVC

Resistance:

It has a very good resistance to alcohol, petrol and perspiration on hand.

Very good resistance to light with a 7 to 8 DIN solidity (The pink color has a lower resistance).

Preparation:

Mix 10-20% PLA thinner with ink and stir the mixture thoroughly.

In hot environments, we recommend using a small amount of PLD retarder when printing fine details or screened images (e.g. 80-120 lines per cm).

To increase the mechanical and chemical resistance or adherence to the support, the ink can be used as a two-component ink by adding the special PLH catalyst in a 10:1 ratio (10 parts ink and 1 part catalyst).

Drying and Hardening:

Dries between 2-3 minutes at an ambient temperature of about 20°C.

If you would like it to dry in only a few seconds, you can use hot air circulation ovens (60-80°C) or high temperature spot devices (air or infrared rays) that can be installed on the piece feeding systems (e.g. rotary tables, conveyors, etc.).

The ink is completely hardened after 5 days.

Color Range:

COMEC color scale has 24 standard colors in bright tones and CMYK colors.

All colors can be mixed with each other.

On request; Special sample colors and colors in metallic/silver tones can be prepared.

Additives:

PLA thinner
PLB fast thinner
PLD retarder
PPLD retarder paste
PLH catalyst
PLT 15/70 transparent base.

Main Colors

Comec PLT Mürekkep Ana Renkler

Mixture Colors

Comec PLT Mürekkep Karışım Renkler

Process Colors

Comec PLT Mürekkep Proses Renkler

Fluorescent and Metallic Colors

Comec PLT Mürekkep Floresan ve Metalik Renkler

Notes

Colors on the color scale are representative. Request a sample for true color.