Surface Pre-Treatment

Flamer 1235 Printing Pre-Treatment Device

The Flamer 1235 Printing Pre-Treatment Device is a device for the treatment of the pieces before and after the printing phase, suitable to be put on all the pad printing machines built by Comec Italia. This type of device is indicated for the pre-treatment of plastic surfaces such us pe-pp or for the after-treatment of material such us polyacetate, since it makes easier the adhesion and polimerisation of the ink during the print.

On all our different types of flamer it is possible to install burners of different lengths in order to work on surfaces of different dimentions.

The stand-alone unit is fully adjustable to accommodate small to medium sized parts. A standard 100mm (3.94") flame nozzle is provided with this unit; however, it can also be configured with the 50mm (1.97") or 120mm (4.72") sizes. The flamer nozzle stroke is 14 inches. Controls can adjust flame intensity, fuel/air mixture, extend/retract speeds of nozzle, and platform height.
 
Operation of this unit is as follows: The substrate is placed either in a holding device, or directly on the platform; then the flamer nozzle is activated via the provided footpedal or direct connection to the print cycle; the flame is ignited by the pilot light as it passes over the part(s); Then the nozzle returns home and the flame is extinguished.